Comments for Farshid's Weblog

Comment on Happillow, the alarm clock snore detecting pillow ! by Ham

Ham — Thu, 28 Jul 2011 10:31:56 +0000

Happillow has a page on facebook now, like it:
http://www.facebook.com/pages/Happillow/146824088706263?sk=app_4949752878

Comment on Model radio transmitters and HobbyKing 6 Channel transmitter guide by lim

lim — Tue, 28 Jun 2011 13:27:05 +0000

Harandi,
1. the Turnigy 9ch has ‘low battery’ alarm that beeps after voltage is <8V. How to overcome that if you use 2C (7.4V Lipo)?

2. I found the battery voltage reading is offset by about -1V when I compared measurement with a multimeter. Anyway to calibrate the voltage on the Tx display?

Thanks
Lim
Malaysia

Comment on About by Ryan

Ryan — Wed, 08 Jun 2011 09:58:20 +0000

Hi Farshid,

Do you have an email I can contact you on? I have a few questions to ask.

Thanks

Ryan

Comment on How to make a LED bracelet with small LEDs by lloydi12345

lloydi12345 — Fri, 25 Feb 2011 13:28:18 +0000

This is cool!

Comment on How to make a LED bracelet with small 3mm Yellow flat top LEDs and thin brass tubes by LED Pocket Light Credit Card Light Bulb | How To Get Credit Card

LED Pocket Light Credit Card Light Bulb | How To Get Credit Card — Sun, 06 Feb 2011 09:30:18 +0000

[...] How to make a LED bracelet with small 3mm Yellow flat top LEDs and … [...]

Comment on Building a Quadrotor – Master thesis by Rohit de Sa

Rohit de Sa — Sun, 02 Jan 2011 02:18:30 +0000

Thanks! I’ve already bought the WiiMotionPlus and interfaced it a while back http://nutsandboltsandflyingsparks.blogspot.com…..I used the site you’ve linked as well as a few others. Are you using the WM+ in any IMU design?

Comment on Building a Quadrotor – Master thesis by harandi

harandi — Sat, 01 Jan 2011 21:23:05 +0000

Do a Google search, I’ve got some info that I can dig out for you about this. Start somewhere like here :
http://randomhacksofboredom.blogspot.com/2009/06/wii-motion-plus-arduino-love.html

Comment on Model radio transmitters and HobbyKing 6 Channel transmitter guide by TED OZ

TED OZ — Thu, 16 Dec 2010 01:21:58 +0000

Have Hobby King 2.4Ghz 6 channel transmitter,plugged in the UL2102 cable driver into my computer and wizard installed the software, “CP 210XUSB to UART Bridge Controller”, so its now in the computer. Question, what do I do now to activate the software into the transmitter please?

Also have the 4channel version and have in the past bound the HK-TR6A receivers. Have just purchased 4 new receivers but they will not bind, the only thing i can think of is that the binding button on the transmitter is not functioning, any ideas please?

Comment on Model radio transmitters and HobbyKing 6 Channel transmitter guide by Metal Halide Lamp

Metal Halide Lamp — Fri, 03 Dec 2010 21:57:09 +0000

you can always tell the quality of USB cables by looking at the thickness of the cable. thicker usb cables have higher quality `;;

Comment on Model radio transmitters and HobbyKing 6 Channel transmitter guide by harandi

harandi — Sat, 20 Nov 2010 14:30:03 +0000

Thanks Hwa,

Glad that it helped.