I got the stuff delivered to my door some days ago. I ordered the following components from Hobby king (for ~64$ on a 4Kg package) on 4th Dec. and they got here in Sweden on 8th Dec. :
ESC : Turingy Plush 25A, TowerPro 18A
Motor : 5 x Hacker style 20-22L 5 x Towerpro 2410 18A
Prop saver : 4x 3mm (sets of one for APC), 1 x 3mm (10 set for GWS motors)
charger: Turnigy Accu6
Battery : 2x Flightmax 20C 3S 2.2A, 1x Flightmax 20C 3S 4A, 1x Flightmax 20C 2S 1A
Frame square Carbon Fiber tube : 4x 10.5mm, 2x 6mm, 2x3mm
Round Carbon Fiber tube : 2x8mm
Woven FG sheets : 1.5mm,2.5mm (Were not in stock )
5 min epoxy Glue : 1x
Battery monitor : 1 x 3 cell
Plug : 1x
I ordered propellers from www.APCProp.com with EMS for 46$ from US. They got shipped on 3rd of Dec. and got here on 8th of Dec.
APC 1047SFP
APC 1238SFP
APC 1047SFP
APC 1238SFP
So far I’ve got the ESC/motor setup running with servo command of Arduino. Wish me luck with the components. The problem right now for me is how to fix the propeller on the shaft of motors. Shaft are 3mm and the the 1238/1047 Propellers accept 4.7mm/5.99mm(with the included adapter) or 7.92mm(without adapter). It seems I need to keep on searching to see how others got around this.
Here are some pictures of them :
Farshid
Hi Farshid
I want to build a quadrotor.
Can I buy from Iran the required propellers ( 2 right-turn and 2 left-turn) ?
If the shaft is 3.175 or close then one of these should work,if not look at the prop saver’s,they might work.
http://www.advantagehobby.com/product.php?productid=50730&cat=436
the link is safe,Thomas
hi dear amir
i want to build quad rotor too
did you build it
can you help me for fabricate?
tnx